Air Tools
NPK Pneumatic Tools
- NPK Air Hammers (Zip guns)
- NPK Flux Chipper
- NPK Rotary Air Drills
- NPK Sand Rammer
- NPK Die Grinder
- NPK Extended Die Grinder
- NPK Straight Grinders
- NPK Straight Impact Wrench
- NPK 90° Corner Impact Wrenches
- NPK 1-1/2" Drive Impact Wrench
Many more tools available, only a few tools shown here.
B-0A
Improved sand rammer delivers fast, powerful blows for ramming small, medium and large flasks on the bench or floor. New throttle lever design provides greater ease of handling with reduced operator fatigue. Additional rubber butts available in 2-1/2" to 4" diameters.
- Brand: NPK
- Piston Diameter: 22 mm
- Stroke: 60 mm
- Taper: M
- Blows Per Minute: 750
- Length: 380 mm
- Weight: 3.1 kg
- Air Inlet Thread: 1/4 NPT
- Average air consumption: 8.8 CFM
- Butt Diameter: 2" Rubber
Part # NBH-400
- Brand: NPK
- Round Shank: .401
- Stoke Speed: 1600 BPM
- Piston Diameter: 13 mm
- Stroke: 95 mm
- Average air consumption: 3.9 CFM
- Weight: 1.4 Kg
Part # NFB-25H
- Brand: NPK
- Shank: 12.5 mm WF Shank
- Stoke Speed: 4000 BPM
- Piston Diameter: 25.4 mm
- Stroke: 23 mm
- Average air consumption: 19.4 CFM
- Weight: 2 Kg
Part # NRD-19RSCT
- Brand: NPK
- Free Speed: 750 RPM
- Drive: #2 MT
- Throttle Style: Roll Throttle
- Drill Capacity: 19 mm
- Maximum output: 960 watts
- Air pressure: 85 PSI
- Average air consumption: 38.8 CFM
- Weight: 5.5 Kg
Part # NRD-32LR
- Brand: NPK
- Free Speed: 380 RPM
- Drive: #3 MT
- Throttle Style: Roll Throttle
- Drill Capacity: 32 mm
- Maximum output: 1470 watts
- Air pressure: 85 PSI
- Average air consumption: 49.4 CFM
- Weight: 10.3 Kg
Part # RG-383
- Brand: NPK
- Wheel Size: 25 mm
- Throttle Style: Safety Lever
- Body Style: Aluminium
- Free Speed: 22,000 RPM
- Collet Size: 1/4"
- Overall Length: 178 mm
- Max. Output: 380 watt
- Avg. Air Cons.: 17.7 CFM
- Air Inlet Thread: 1/4 NPT
- Recommended Hose Size: 3/8"
- Weight: 0.6 Kg
Part # NHG-65LKLW-20
- Brand: NPK
- Throttle Style: Safety Lever
- Free Speed: 18,000 RPM
- Collet Size: 1/4"
- Spindle Thread: 3/8-16 UNC
- Overall Length: 21-3/16"
- Max. Output: 1 hp
- Avg. Air Cons.: 19.4 CFM
- Air Inlet Thread: 1/4 NPT
- Recommended Hose Size: 3/8"
- Weight: 3.5 lbs
Part # NHG-125LW
- Brand: NPK
- Maximum Wheel Size: 125 x 19 x 12.7
- Free Speed: 7500 RPM
- Spindle Thread: 1/2-12 UNC
- Overall Length: 453 mm
- Throttle Style: Safety Lever
- Maximum Output: 810 watts
- Average air consumption: 31.8 CFM
- Weight: 3.2 Kg
Part # NHG-150LW
- Brand: NPK
- Maximum Wheel Size: 150 x 25 x 15.9
- Free Speed: 6200 RPM
- Spindle Thread: 5/8-11 UNC
- Overall Length: 488 mm
- Throttle Style: Safety Lever
- Maximum Output: 960 watts
- Average air consumption: 38.8 CFM
- Weight: 4.6 Kg
Part # NW-32LA
- Square Drive: 1"
- Free Speed: 4000 RPM
- Torque Range: 487-1032 FT/LBS
- Handle Style: "D" Inside Trigger
- Bolt Capacity: 33 mm
- Air Pressure: 85 PSI
- Average air consumption: 30 CFM
- Weight: 9.7 Kg
Part # NAW-1200
- Square Drive: 1/2"
- Free Speed: 6500 RPM
- Maximum Toque: 200 FT/LBS
- Handle Style: Straight
- Bolt Capacity: 12 mm
- Air Pressure: 85 PSI
- Average air consumption: 3.5 CFM
- Weight: 3 Kg
Part # NAW-19A
- Square Drive: 3/4"
- Free Speed: 4000 RPM
- Working Torque: 470 FT/LBS
- Handle Style: "D" Outside Trigger
- Bolt Capacity: 18 mm
- Air Pressure: 85 PSI
- Average air consumption: 17.7 CFM
- Weight: 10.6 Kg
Part # NWH-500
The clutch hammer design produces an exceptionally high torque output,
with minimal vibration.
- Square Drive: 1-1/2"
- Free Speed: 3500 RPM
- Torque Range: 1800 ~ 4425 Ft/Lbs
- Handle: Jumbo Style
- Bolt Capacity: 52 mm
- Air Pressure: 85 PSI
- Average Air Consumption: 42.4 CFM
- Weight: 29 kg
Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.
Airtek Ltd., 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820