Torque Tightening Limiter

When tightening wheel nuts using an impact wrench, the exact torque becomes a problem to be solved. OZAT's Torsion-bar will allow you to tighten the nut as much as you want but will not tightened by higher torque that necessary.

OZAT's Torsion-bar will absorb by means of Torsion all extra power generated by the impact wrench.

OZAT's Torsion-bars are a pre-determined Length and narrow high quality steel socket. These sockets are designed to twist and spring back when the nut reaches its correct torque and the impact wrench continues to blow. The nut will stop turning and tightening at the correct torque.

OZAT's Torsion-bar cannot promise minimum torque, the torque must be generated by the impact wrench used.

1/2" Drive

1" Drive

^Top

^Top