Fits IR (171 & 181), NPK, Uryu, Jet,
Stanley,
Yutani (YFC-0) as well as other brands
Fits CP, Keller, Thor, Sioux, Aro, Ajax
1400,
Rockwell, IR (172-182) and other brands
Fits Cleco, Rotor, Aro, CP (9356), IR
(183),
Ajax (1405) and other brands
Fits Master Power, Black & Decker,
Rodac
and other brands
Fits Atlas Copco and other brands
Fits Fuji and other brands
Ingersol Rand Style Shank |
Chicago Pneumatic Style Shank |
Cleco Style Shank |
Master Power Style Shank |
Atlas Copco Style Shank |
Fuji Style Shank |
Type | Width | Length | |
381 |
395 395-12 395-18 |
391 391-12 391-18 |
385 385-12 385-18 |
3250 3250-12 |
Blank | 7" |
![]() |
||
382 382-12 382-18 |
396 396-12 396-18 |
392 392-12 392-18 |
386 |
3251 3251-12 |
3254 |
Flat Chisel | 3/4" | 7" 12" 18" |
![]() |
383 383-12 383-18 |
397 397-12 397-18 |
393 393-12 393-18 |
387 |
3252 3252-12 |
3255 |
Scaling Chisel | 1-3/8" | 7" |
![]() |
380 380-12 380-3 |
399 399-12 399-3 |
390 390-12 390-3 |
389 |
Wide Scaling Chisel |
2" 2" 3" |
7" 12" 7-1/2" |
![]() |
||
384 384-12 384-18 |
398 |
394 394-12 394-18 |
388 388-12 388-18 |
3253 3253-12 |
3256 |
Angle Chisel | 1-3/8" | 7" 12" 18" |
![]() |
3229 | 3226 | 3232 | Cape Chisel | 5/16" | 7" | ![]() |
|||
3228 | 3225 | 3231 | Round Nose | 5/16" | 7" | ![]() |
|||
3227 | 3224 | 3230 | Diamond Point | 1/4" | 7" | ![]() |
|||
3221 | 3201 | 3241 | Single Panel Cutter | 7" | ![]() |
||||
3280 3280-12 3280-18 |
Heavy Blade Flat Chisel |
1-1/4" | 7" 12" 18" |
![]() |
See also Non-Sparking tools
Ingersol Rand Style Shank
Part #
9025
Contains one each of the following:
381
382
383
384
Chicago Pneumatic Style Shank
Part #
9027
Contains one each of the following:
395
396
397
398
Cleco Style Shank
Part #
9026
Contains one each of the following:
391
392
393
394
19/32" Hex Shank
These chisels fit the
following scalers:
Edco
ALR-2, ALR-4, ALR-5
MacDonald
LPS3, SPS5
Master Power
5195
Trelawny
136.3299, 136.3499,
136.3599, 136.3699
Part # 3281
1" Wide x 8" Long
Part # 3282
2" Wide x 8" Long
Part # 3283
4" Wide x 8-3/4" Long
Part # 3284 4" Wide x 8-3/4" Long holder with holes (illustrated)
Part # TX-20100 4" Wide x 8-3/4" Long holder with holes Mater Power Shank (non illustrated)
Part # 3285 4" Wide Flex Blade
Part # 3286 8" Wide Flex Blade
Part # 3287 12" Wide Flex Blade
Note: Flex blades come complete with 2 each: Bolts, Nuts and Washers
Tell us more about your experience with Airtek Ltd
Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.