MP-10187

3/16" Capacity Air Riveter

Economically designed for heavy-duty, high speed productions applications. Constructed without hydraulics for trouble free riveting and easy maintenance.

• Maximum Capacity: 3/16"
• Pulling Force: 2000 ft/lbs
• Stroke: 0.87"
• Length: 11-11/16"
• Weight: 4.25 lbs
• Air Inlet Thread: 1/4"
• Recommended Hose Size: 3/8"
• Average Air Consumption: 5 cfm
• Air Pressure: 90 PSI

^Top

SPS35038UK

Heavy-duty rivet nut installation tool includes nose assemblies for 8-32 through 1/2-13 rivet nuts. The spin-pull-spin actuation principle allows for quick repeatable installation in a production environment. Supplied in a blow-molded case with the seven mandrels

Comes complete with 7 sizes
8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 1/2-13

• Maximum Capacity: 3/8"
• Pulling Force: 3500 ft/lbs
• Stroke: 6 mm
• Length: 11-7/8"
• Weight: 5.4 lbs
• Air Inlet Thread: 1/4"
• Recommended Hose Size: 3/8"
• Average Air Consumption: 28 cfm
• Air Pressure: 100 PSI

^Top

MP-00G-NN

2" Stroke Sand Rammer.
Lightweight, streamlined design for better control and reduced operator fatigue. Hard, rapid hitting performance ideal for refractory sand work. Additional rubber butts in 1-1/2" or 2-1/2" diameter and 3-1/4" steel butts available.

• Piston Diameter: 11/16"
• Stroke: 2"
• Taper: S
• Blows Per Minute: 1600
• Length: 11-3/4"
• Weight: 4-1/2 lbs
• Air Inlet Thread: 3/8 NPT
• Average air consumption: 12 CFM
• Butt Diameter: 1-3/4" Rubber
• Made in USA

^Top

5095L

• Twin hammer impact mechanism
• Steel hammer case for rugged performance
• Three piece housing for ease of maintenance
• Combination through hole friction ring socket retainer
• Heavy duty support handle
• Conveniently located reverse

• Drive: 1" Friction Ring
• Max Torque: 1400 ft-lbs
• Free Speed: 5000 rpm
• Length: 18.25"
• Weight: 18.2 lbs
• Air Inlet Thread: 1/2" NPT
• Recommended Hose Size: 1/2"
• Average Air Consumption: 15 cfm

J-3800P

• Pinless hammer impact mechanism conveys power directly to the anvil with fewer parts for reduced vibration and maintenance
• Heavy-duty, all-steel industrial construction
• Variable speed trigger and built in regulator for precise control
• Easy-to-reach forward / reverse switch
• Muffled handle exhaust directs air away from user
• Pistol grip design equipped with center balanced hanging ring
• Cushioned auxiliary handle mounts on left side.

• Drive: 1" Friction Ring
• Max Torque: 1400 ft-lbs
• Free Speed: 4700 rpm
• Length: 11"
• Weight: 21.75 lbs
• Air Inlet Thread: 1/2" NPT
• Recommended Hose Size: 1/2"
• Average Air Consumption: 57 cfm

JET-1010 /
CP-797

• Tool made in Japan for both Jet and CP
• Unique pinless hammer provides for stability
• Distinctive clutch design generates maximum power
• Variable speed teasing throttle
• Built in regulator
• Incredible power-to-weight ratio
• Cushioned grip dead handle
• Side-mounted bumper guards

• Anvil: 1" Friction Ring and Through Hole
• Max Torque: 1250 ft-lbs
• Free Speed: 4100 rpm
• Length: 16-3/16"
• Weight: 28.95 lbs
• Air Inlet Thread: 1/2" NPT
• Recommended Hose Size: 1/2"
• Average Air Consumption: 35 cfm

1578

1-1/2" Drive Extra Heavy-Duty Impact Wrench

Features a through-hole anvil. Designed to produce an exceptionally high torque output. Effective for shipyards, bridge construction, building construction and heavy manufacturing plants. Time tested design for maximum durability. Parts are interchangeable with Ingersoll-Rand Models 578A1, 5780A1 and 5980A1.

• Square Drive: 1-1/2" Square Through-Hole
• Max Torque: 13,560 ft-lbs
• Length: 23"
• Weight: 86 lbs
• Air Inlet Thread: 3/4"
• Recommended Hose Size: 3/4"
• Average Air Consumption: 138 cfm

^Top

MP-CH3R

Inside trigger design for greater comfort and control. Features include plate valve, vibration spacers, rotating exhaust, and replaceable inlet bushings. 4-Bolt design reduces handle breakage.

• Shank: .680 round, Oval collar
• Blows Per Minute. 2100 bpm
• Bore. 1-1/8"
• Stroke. 3-3/4"
• Length. 16-1/2"
• Weight. 19 lbs
• Air Inlet Thread. 3/8"
• Recommended Hose Size. 1/2"
• Average Air Consumption. 35 cfm

See the chisels

Also available with .580 Hex shank / oval collar

FBCH-3H

Outside trigger design. Features include plate valve, vibration spacers, rotating exhaust, and replaceable inlet bushings. 4-Bolt design reduces handle breakage.

• Shank: .580 Hex, Oval collar
• Blows Per Minute. 1900 bpm
• Bore. 1-1/8"
• Stroke. 3"
• Length. 16-1/4"
• Weight. 19.5 lbs
• Air Inlet Thread. 7/8-24 NPTF
• Recommended Hose Size. 1/2"
• Average Air Consumption. 28.2 cfm

See the chisels

MP-CH4R

Four bolt design eliminates handle breakage. Standard equipment includes chisel retainer and chisel retainer spring. Most parts interchangeable with Sullair CH series chipping hammers

• Shank: .680 round, Oval collar
• Blows Per Minute. 1700 bpm
• Bore. 1-1/8"
• Stroke. 4-1/4"
• Length. 16-1/2"
• Weight. 19.5 lbs
• Air Inlet Thread. 1/2"
• Recommended Hose Size. 1/2"
• Average Air Consumption. 35-39 cfm

See the chisels

Also available with .580 Hex shank / oval collar

^Top

CP4181

The CP4181 rivet buster is ideal for cutting large rivets, concrete demolition, and heavy-duty chipping work in maintenance and construction. Features a Boyer spool valve to deliver smooth power in any operating position.

• Shank Size 1-1/8" (Jumbo Shank)
• Stroke Length 11
• Piston Diameter 1-3/16"
• Capacity 1" Rivets
• Impact Rate 720 BPM
• Weight 34.5 lbs
• Overall Length 26"
• Air Consumption 32 CFM
• Air Inlet 1/2 " NPT
• Hose Size 1/2"

Rivet Buster Retainer & Sleeve Alignment

Hose whip
WHIP1/2

Assembly comes complete with Universal (Chicago) coupler, Oiler/Filter, 6 feet of construction air hose and 1/2" NPT male swivel fitting

See the chisels

^Top

CP4611-P

The CP4611-P rivet buster used for removing rivets and in metal and concrete applications, including demolition and bridge work. Among the best power-to-weight ratios available. Teasing throttle for precise control. Rugged design and components for reliable operation under tough conditions. Stepped cylinder design for added safety.

• Shank Size 1-1/8" (Jumbo Shank)
• Stroke Length 11
• Piston Diameter 1-3/16"
• Capacity 1" Rivets
• Impact Rate 720 BPM
• Weight 33 lbs
• Overall Length 26"
• Air Consumption 45 CFM
• Air Inlet 1/2 " NPT
• Hose Size 1/2"

Rivet Buster Retainer & Sleeve Alignment

Hose whip
WHIP1/2

Assembly comes complete with Universal (Chicago) coupler, Oiler/Filter, 6 feet of construction air hose and 1/2" NPT male swivel fitting

See the chisels

^Top

RB-110

Toku rivet busters are the ideal tool for any mid-sized demolition job you can throw at them. They perform under the roughest conditions, whether you're demolishing bridge decks, parking garages, ripping tanks, cutting rivet heads, or any demolition work. These hard hitting tools simply perform.

• Shank Size 1-1/8" (Jumbo Shank)
• Stroke Length 11-15/16"
• Piston Diameter 1-3/16"
• Impact Rate 680 BPM
• Weight 35 lbs
• Overall Length 26"
• Air Consumption 32.9 CFM
• Air Inlet 3/8" NPT
• Hose Size 1/2"

Rivet Buster Retainer & Sleeve Alignment

Hose whip
WHIP3/8

Assembly comes complete with Universal (Chicago) coupler, Oiler/Filter, 6 feet of construction air hose and 3/8" NPT male swivel fitting

See the chisels

^Top

MP-US3

Adjustable Throttle

Newly developed pencil grinders are compact, super lightweight and designed for operator efficiency. Fast and powerful for the toughest jobs. Will grind all materials with amazing speed and ease. Ideal for metal, plastic, wood and stone work.

• Collet Size: 1/8"
• Free Speed: 50,000 ~ 60,000 RPM
• Diameter: 0.63"
• Length: 5-1/4"
• Weight: 0.24 lbs
• Air Inlet Thread: 1/4"
• Recommended Hose Size: 3/8"
• Average Air Consumption: 0.78 cfm

^Top

Part # G18901F

• Throttle Style: Safety Lever
• Free Speed: 18,000 RPM
• Collet Size: 1/4"
• Overall Length: 6.25 "
• Max. Output: 0.9 HP
• Avg. Air Cons.: 27 CFM
• Air Inlet Thread: 1/4"
• Recommended Hose Size: 3/8"
• Weight: 1.43 Lbs

^Top

MP-1FB-COLLET

Features safety lever throttle. Small, rugged, versatile angle grinder will do
a multitude of jobs with minimum operator fatigue. Heavy enough to remain
stable, yet light enough to be maneuvered easily around complex shapes.

• Free Speed: 12700 rpm
• Spindle Thread: 3/8"-24
• Maximum HP: 1.00
• Head Height: 4-1/4"
• Length: 9"
• Weight: 3.5 lbs
• Air Inlet Thread: 1/4"
• Average Air Consumption: 24.0 cfm

^Top