Airtek Ltd. — 514-336-3820 — —

Air Tools
Miscellaneous Air Tools

air pneumatic circular saw


Circular Saw
General purpose saw featuring a swiveling saw rest for angled cuts.

Blade Diameter:  7-1/4"
Depth of Cut:  2-23/64"
Free Speed:  4500 RPM
Maximum HP:  1.50
Length:  11-1/2"
Weight:  10.5 Lbs
Air Inlet Thread:  1/4" NPT
Average Air Consumption:  8.0 cfm

(Blade not included)



Orbital Sander

Palm style sander with constant 3/16" orbit for extra fine finishing.
Uses standard 3-2/3" x 9" pad with positive locking clamps for maximum paper retention.

Overall Length:  9"
Air Inlet:  1/4 NPT
Pressure Required:  60 PSI
Air Usage CFM:  4 CFM
Minimum Hose Size:  3/8"

needle scaler


chisel scaler



Weight 6 lbs 4 oz. 6 lbs 10 oz.
Length 17" W/5" Needles 15" W/Chisel
Bore 1" 1"
Stroke 1-1/8" 1-1/8"
BPM 4600 4600
INLET 1/4" NPT 1/4" NPT
Minimum Hose Size 5/16" 5/16"
Tool Applications

De-rusting and cleaning of metals
Peening of welded joints
Cleaning castings
Cleaning welding slag
Removing barnacles
Removing paint, rust and dirt
Chipping stone, concrete and brick
Needle scalers adjust to any surface contour automatically

Airtek Pneumatic scalers have been proven throughout the industrial job sites, as well as construction and marine repair industry.

Made in the U.S.A.
Tools have been proven in thousands of applications
Tens of thousands of these tools are in the field
Completely convertible from needle to chisel scaler and vise versa

Standard Equipment

Needle Scaler:  One set 5" Scaler Needles
Weld Flux Scaler:  One 7" Flat Chisel

See the chisles

cleco style

MP-2LRCS long reach scaler TX-2LR


Tool Applications

Long Reach Scaler

Tile and non-skid removal
Grease and paint removal
Glue and resin removal
Barnacle and heavy scale removal


Weight:  14 lbs
Length:  48"
Air Consumption:  12 CFM
Bore:  15/16"
Stroke:  2"
Blows per Minute: 3400
Inlet:  1/2" NPT
Minimum Hose Size:  1/2"

See the chisles

master power style


Part # TXAS1

The AIRTEK Pneumatic Air Engraver is lightweight and easy to operate.  It is designed to write on a variety of materials such as steel, glass, plastic, and wood.  It can be used for deburring, trimming and removing broken studs on small applications.

Comes in convenient carrying case.
Equipped with 3/8" NPT fitting.
Will write on a variety of materials.
Carbide-tipped stylus for longer life.
Hardened piston for longer life.
Steel housing for durability.
Adjustable throttle for a variety of jobs.
Made in the U.S.A.
Vibrating tip for all uses.

Weight:  5 oz.
Consumes less than:  1 CFM
Air inlet :  1/4" (NPFT)
Hose size:  1/4" ID
Overall Length:  5"
Minimum air hose size:  3/8" ID

Stylus Part # TX-21019

air vise

Part # 60

Length:  12"
Width:  6"
Height:  6"
Jaw Width:  3"
Jaw Depth:  2"
Weight (Vice Only):  24 lbs.
Maximum Jaw Opening (Without Jaw Plates):  3"
Maximum Travel:  5/8"
Maximum Operating Pressure:  150 PSI

Gripping Force is 15 times Air line Pressure.

New, completely redesigned AIRTEK, Air Vice now offers the most rugged, precision built, completely trouble-free air tool on the market.  A complete ready made jig for high speed volume production.

AIRTEK Air Vice has a jaw gripping force of 15 times air line pressure. At its maximum operating pressure of 150 pounds per square inch, derived from either an airline or individual compressor, it develops a maximum jaw pressure of 2250 pounds (15 X 150 = 2250).

Any amount of force, down to a light squeeze for delicate work may be had by simply regulating the pressure of air feed to the vise by means of an air pressure regulator.

Soft steel jaws are easily fitted with cavities to hold castings, screw machine parts, etc.  Once set, the maximum travel is 5/8 inch, but generally 1/16 inch or less is desirable for rapid insertion and removal of work.  Fixed and movable jaws are made " extra-thick" with top surfaces ground for attacking jigs, fixtures, drill bushings, etc. Cavities can be milled right into the iron jaws for holding special shapes.

The ram of AIRTEK Air Vice is driven by a long-life multiple type diaphragm instead of a piston.  No packing gland or cross head.  No fiction loss, air leakage or need for constant lubrication.  New heavy duty diaphragm is rigidly clamped between precision ground surfaces of rugged aluminum head and cylinder housing castings. No piston cups or packing's to leak or wear out.

Hold down lugs are provided for attachment to metal or wood bench, drill press, miller, grinder or shaper.  The vise comes complete with two five foot Air Hoses, Foot-Control Valve with Guard and fittings, ready for use.


Castings - Extra heavy- gray iron and aluminum

Piston - Zinc Alloy Die Cast Diaphragm - "Long life" Multiple type