Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Type 15

Annular Cutters - 1" Cut Depth

Type 15L

Annular Cutters - 2" Cut Depth

These unique cutters reduce time and power requirements by cutting larger diameter holes as a ring to produce a solid slug.
The power requirements are a fraction of those needed when using a twist drill or indexable tooling. The multiple teeth cut only the
outer diameter of the hole and yield a super fast reamed quality hole. SPIRA-BROACH™ tools are manufactured using powdered metal
M-42 cobalt steel and allow speeds 30-40% higher than high speed steel annular cutters. In many applications SPIRA-BROACH cutters
will more than double tool life between resharpenings.

Spira-Broach™ Cutters - Ultra High Performance

Gold Finish - Super Cobalt Steel
Give the lowest cost per hole
Leave a burr-free hole
Allow overlapping cuts on existing holes
Cut on curved surfaces
Use less power
Stay sharp much longer
All cutters have 3/4" shank drive with 2-flats @ 90°

^Top

Part # 13710 - 11/64" diameter pin fits 7/16'' x 1" depth cutter

Part # 13720 - 11/64" diameter pin fits 7/16'' x 2" depth cutter

Part # 00902 - 1/4" diameter pin fits 1/2" & larger x 1" depth cutters

Part # 00903 - 1/4" diameter pin fits 1/2" & larger x 2" depth cutters

^Top