Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Air Tools
Nile Pneumatic Tools
Nile Heated Power Cutter

The blade is heated by a heater and these heat power cutters most suitable for cutters
are most suitable for cutting hard and break-easy plastics such as acrylic resins, etc.

A transformer is needed for the heat air nippers.
Blades are sold separately
Special blades are available upon special request.

nipper

AH10

control

HTR30N

cutter

FA50

Part # OAL
MM
Weight
Grams
Diameter
MM
Air Consumption
CM3 / Stroke
Blade # Cutting Capacity
MM
AH10 200 560 45 130 FA50 4.5
(Hard Plastics)
AH12 200 570 45 131 FA50 5.5
(Hard Plastics)

Temperature of the Blade 90°C - 150°C
Needing 25 Minutes to get to maximum temperature.

^Top

Air Shears

Suitable for narrow plate, plastic plate and wire net

shear

AS

shear

ASP
(With pressure increase mechanism)

Part # OAL
MM
Weight
Grams
Diameter
MM
Air Consumption
CM3 / Stroke
PSI Cutting Capacity
MM
AS-100 139 230 36 116 62-85 0.5 Plate
AS-200 166 500 45 230 62-85 1.0 Plate
ASP-150 211 300 36 223 62-85 0.8 Plate
ASP-250 253 720 45 500 62-85 1.2 Plate
Wire Twister

When the lever is pressed, the blade catches the wire and rotates to twist it.

twister

SP-40W

Before

wire

After

twister

WT-06

Part # OAL
MM
Weight
Grams
Diameter
MM
Air Consumption
M3 / Min
PSI Cutting Capacity
WT-06 225 800 38 0.45 70 - 85 1.0 MM Steel Wire
1.2 MM Copper Wire
SP40W 245 1200 38 0.45 70 - 85 1.2 MM Steel Wire
2.0 MM Copper Wire

^Top

Multi-Purpose Scissors

scissor
Versatile to cut a wide variety of materials, from light sheet metal to plastics as well as carpet.
Good for cutting and trimming thinner sheets of rubber or vinyl cloth, paper, etc.

Part # OAL
MM
Weight
Grams
Diameter
MM
Air Consumption
M3 / Min
PSI
GS-01 140 500 36 0.45 55 - 85

Blade Part # 10M

^Top

Mini Belt Sander

Can be used for automobile body work and sheet metal processing, wood work, removing rough edges of small metal precisions parts, finishing, rust removal and polishing.

MB-20

sander

For use in narrow confined spaces or for spot grinding.

MB-20S

sander

Its three point construction makes the grinding of flat surfaces easier.

Part # Belt
W x L
MM
AOL
MM
Weight
Grams
Belt Speed
@ Non-load
Air Consumption
M3 / Min
PSI
MB-20 20 X520 250 930 2200 M / MIN 0.3 70 - 85
MB-20S 20 X520 250 1080 2200 M / MIN 0.3 70 - 85

^Top

Air Twister

3-5 Times faster hand operation

twister

Before & After

nile

Part # OAL
MM
Weight
Grams
Diameter
MM
Air Consumption
M3 / Min
PSI
RC-6 180 830 38 0.45 70 - 85

^Top

Pneumatic Saw & File

It's a Saw!!! It's a File!!!

It cuts automobile panels and metal pipes, and all it takes for the user to get started is a small hole. With file, holes in sheet metal and be enlarged (to install a car antenna or other auto accessory), holes in panels can be better matched, molds filed, castings de-burred and paint scrapped.

It cuts an iron plate (thickness: 1mm)
At the rate of 400 mm a minute AF-5
At the rate of 900 mm a minute AF-10


air saw
  • Power boost switch for easy cutting thick materials.
  • Quiet operation and exhaust is away from user.
  • Rubber-covered body provides comfortable usage and a good grip.
  • Saw and file form a one-piece unit. Any ordinary hacksaws can be shortened and easily attached. (Only AF-10)
Part # Body Length
MM
Weight
Grams
Grip Size
MM
Air Consumption
M3 / Min
PSI Stroke
MM
Standard
Attachments
AF-5 163 400 29 0.2 78 - 92 5 2 Saw Blades
1 Blade Holder
1 Each Flat, Round & Triangular Files
AF-10 233 830 38 0.28 78 - 92 10 3 Saw Blades
1 Each Flat, Round & Triangular Files
 

Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.

Airtek Ltd., 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820