Milwaukee Bushings & Arbors

Email sales@airtekltd.com Phone 514-336-3820 Fax 514-745-1764

Air Tool Accessories

Milwaukee Brush

	Shank Arbors
	Knock Out Bushings
	Threaded Adpters
	Whippet - 1" OD
	Mono-Bilt - 2" OD
	Back to the Main Milwaukee Brush Page

Shank Arbors

PART NUMBER	ARBOR HOLE DIA.	SHANK SIZE
21841	1/4"	3/16"
21842	3/8"	1/4"
21843	1/2"	1/4"

These adapters can be used to adapt a small diameter wheel brush with an arbor hole for use in a portable power tool which requires that the brush be mounted with a shank. Do not use with larger than 4" diameter single section wheel brushes.
Caution: be sure the nut is engaged on the thread for the full length of the nut. Direction of rotation should tighten nut. Maximum safe free speed is 20,000 r.p.m.

^Top

POWER BRUSH ADAPTERS

KNOCK-OUT BUSHING - USE ONE PER BRUSH

PART NUMBER	DIA.	ARBOR HOLE	WIDTH	USE WITH
91005	1/2"	1/4"	3/32"	Dura-bilt and
91006	1/2"	3/8"	3/32"	Narrow Faced
91007	5/8"	1/2"	3/32"	Whippets
91004	3/8"	1/4"	5/32"	Twist - Tufts
91003	1/2"	1/4"	5/32"	and
91001	1/2"	3/8"	5/32"	Metal
91002	5/8"	1/2"	5/32"	Centers

THREADED ADAPTERS

PART NUMBER	DESCRIPTION
78262	5/8 - 11 to 3/8 -24
78263	5/8 - 11 to M10x1.25
78264	5/8 - 11 to M10x1.50

WHIPPET-1" DIAMETER

SIZE	3/8"	1/2"	5/8"	3/4"	7/8"
NO.	21766	21767	21768	21769	21770

MONO - BILT - 2" DIAMETER
(sold by pair)

SIZE	1/4"	3/8"	1/2"	5/8"	3/4"	7/8"	1"	1-1/4"	1-1/2"
NO.	21736	21737	21738	21759	21760	21761	21762	21764	21765

^Top