Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Tools & Accessories
Milwaukee Brush
Encapsulated Wire Brushes

MILWAUKEE encapsulated brushes are bonded in a synthetic elastomer material.
Encapsulation produces a brush in which the individual wire tips are firmly supported.
This assures a safe, well balanced brush which will normally have a longer life than conventionally constructed wire brushes.
A consistently stiff brushing action is assured because, in use, the elastomer material gradually wears away exposing only the wire tips.
All brushes on the page are carbon steel.


Part # Diameter Wire Size Approximate
Face
Width
Approximate
Trim
Length
Recommend
Arbor
Hole
Maximum Safe
Free Speed
(R.P.M.)
0143 4" .010 3/8" 3/4" 1/2" 6000
0144 6" .0118 1/2" 1-1/4" 1/2" 6000
0145 6" .0118 1" 1-1/4" 2" 6000
0146 8" .014 1/2" 2-1/4" 5/8" 4500

encapsulated brush

Encapsulated Small Diameter Wire Wheel

Part # Diameter Wire Size Approximate
Face
Width
Approximate
Trim
Length
Recommend
Arbor
Hole
Maximum Safe
Free Speed
(R.P.M.)
0362 1-1/2" .008 3/16" 3/8" 3/8" 20,000
0363 1-1/2" .014 3/16" 3/8" 3/8" 20,000
0364 2" .008 1/4" 1/2" 1/2" 18,000
0365 2" .0118 1/4" 1/2" 1/2" 18,000
0366 3" .008 1/4" 1" 1/2" 15,000
0367 3" .014 1/4" 1" 1/2" 15,000

encapsulated wire brush

Encapsulated Wire End Brush

Part # Diameter Wire Size Trim
Length
Shank
Diameter
Maximum Safe
Free Speed
(R.P.M.)
20449 3/4" .006 1" 1/4" 15,000
20450 3/4" .010 1" 1/4" 15,000
20451 1" .006 1" 1/4" 13,000
20452 1" .014 1" 1/4" 13,000

encapsulated end brush

Encapsulated Wire Cup Brush

Part # Diameter Wire Size Arbor
Hole
Maximum Safe
Free Speed
(R.P.M.)
20354 4" .0118 5/8"-11 6,000
20355 4" .020 5/8"-11 6,000
20356 6" .020 5/8"-11 6,000

encapsulated cup brush

Encapsulated Wire Tube Brush

Part # Diameter Wire Size Brush
Part
Length
Overall
length
20026 1/2" .006 2" 5"
20027 5/8" .008 2" 5"
20028 3/4" .010 2-1/2" 5-1/2"
20029 7/8" .010 2-1/2" 5-1/2"
20030 1" .010 2-1/2" 5-1/2"

encapsulated tube brush

Table of Arbor Hole Numbers

SIZE 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2" SPECIAL
NO. 1 2 3 4 5 6 7 8 9 0

When ordering, add the Arbor Hole Number as the last digit of the Part #.
Indicate any arbor size not shown in the table (Special) by adding"0" as the Arbor Hole Number and specify the size you want.

^Top

 

Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.

Airtek Ltd., 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820