Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Tools & Accessories
Milwaukee Brush
Dura-Bilt Crimped Wire Brushes

wire brush

Milwaukee DURA-BILT wire wheel brushes are heavily filled with high quality crimped tempered wire, accurately balanced to provide fine to medium brushing action.

These narrow face, single section brushes provide lighter brushing action than the Milwaukee MONO-BILT line. They can be used individually or in assemblies mounted on a shaft.

Milwaukee DURA-BILT wire wheel brushes are general purpose wheels. These tools are excellent for brushing uneven surfaces or areas inaccessible to wider brushes.

Milwaukee DURA-BILT will remove light scale or dirt, rust or corrosion, or light burrs on non-ductile materials.

Carbon Steel Wire

Diameter Part #
Standard Wire Sizes
Approximate
Face
Width
Approximate
Width
on Arbor
Trim
Length
Maximum Safe
Free Speed
(R.P.M.)
.006 .008 .010 .0118 .014
3" 0100 0101 0102 0103 0104 9/16" 7/16" 3/4" 10,000
4" 0105 0106 0107 0108 0109 1/2" 7/16" 11/16" 6,000
6" 0110 0111 0112 0113 0114 5/8" 7/16" 1-1/8" 6,000
8" 0115 0116 0117 0118 0119 5/8" 7/16" 1-3/4" 6,000
10"   0120 0121 0122 0123 7/8" 7/16" 2-3/4" 3,600
12" 0141   0124 0125 0126 3/4" 7/16" 3" 3,000
15"       0127 0128 3/4" 7/16" 4-1/2" 2,500

^Top

Stainless Steel and Brass Wire

Diameter Part #
Standard Wire Sizes
Approximate
Face
Width
Approximate
Width
on Arbor
Trim
Length
Maximum Safe
Free Speed
(R.P.M.)
SS
.006
SS
.010
SS
.012
Brass
.011
4" 0136 0130 0135   1/2" 7/16" 11/16" 6,000
6" 0134 0133 0131 0142 5/8" 7/16" 1-1/8" 6,000
8"     0132   5/8" 7/16" 1-3/4" 6,000

^Top

Table of Arbor Hole Numbers

SIZE 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2" SPECIAL
NO. 1 2 3 4 5 6 7 8 9 0

When ordering, add the Arbor Hole Number as the last digit of the Part #.
Indicate any arbor size not shown in the table (Special) by adding"0" as the Arbor Hole Number and specify the size you want.

 

Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.

Airtek Ltd., 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820