AIRTEK
email  sales@airtekltd.com      phone 514-336-3820     fax 514-745-1764

all words any words exact phrase
Airtek
Compressor
Dryers
Coilhose
Yutani
Ozat
Abrasives
Viking
Airtek
Fu Sheng
Air Tool Accessories
Milwaukee Brush
 
Airtek Floor Sweeping Brushes
Airtek Handles & Floor Brush Braces
Airtek Squeegees
Airtek Back to the Main Milwaukee Brush Page
 
Floor Sweeping Brushes

floor sweeping brushes

Note: Handles sold separately
Substitute fill material may be used when listed materials are unavailable or uneconomical to use

FINE SWEEPING
Good quality soft brushes for use on smooth or polished floors in office, home, school, etc.

SILVER SWEEP
An excellent brush for fine sweeping in factories, offices and stores on smooth surfaces, wood, tile, and linoleum floors. Filled with 100% flagged Silver Grey Acron. Simulates Horsehair or Hog bristle at a nominal cost. Solvent resistant bristles are unaffected by oil, water or cleaners. Acron Sweeps the finest dirt, is long wearing and washable. Staple set in a lacquered hardwood block having two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
21358 18" 3"
21359 24" 3"

ALMA
Horsehair - Nylon mix stapled in lacquered hardwood block having two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
20760 18" 2-7/8"
20770 24" 2-7/8"

LUCILLE
Horsehair- Tampico fibre mix stapled in lacquered hardwood block having two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
20790 18" 3"
20800 24" 3"
^Top

MEDIUM SWEEPING
A selection of brushes for diversified general applications on a variety of average floors.

PEARL
Oil resistant, washable black synthetic fill. Center stock, crimped; casing, straight. Stapled in lacquers hardwood block. 2 threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
20830 16" 2-7/8"
20840 18" 2-7/8"
20850 24" 2-7/8"
20860 36" 3"

ACME
Low priced. Black Tampico fibre fill. Staple set in lacquered hardwood block having two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
20880 16" 2-7/8"
20890 18" 2-7/8"
20900 24" 2-7/8"

ALICE
Popular. Black Tanpico fiber center. Tanpico and horsehair casing. Staple set in lacquered hardwood block having two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
20960 14" 2-7/8"
20970 16" 2-7/8"
20980 18" 2-7/8"
20990 24" 2-7/8"
21000 30" 2-7/8"
21010 36" 2-7/8"

JANE
Longer trim allows better flexing action. High quality. Selected grey Tampico center, grey horsehair casing reinforced with nylon. Stapled in lacquered hardwood block. 2 threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
21080 18" 3-1/4"
21090 24" 3-1/4"

VANGUARD
For medium to heavy sweeping. Stiffer center moves heavy or caked dirt in factory or warehouse. Long trim for good flexing. Oil treated stiff Palmetto fibre center with horsehair casing. Staples set in lacquered hardwood block having two treated handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
21040 18" 3-1/4"
21050 24" 3-1/4"

^Top

HEAVY SWEEPING
These brushes are recommended for seeping concrete and other rough surfaces found in garages, on pavement and factory floors.

ALERT - S
Standard ALERT broom with sturdy plated steel scraper. Use threaded handle with 21734 brace. For heavy jobs, 21728 brace handle is preferred.

PART NUMBER LENGTH OF BLOCK TRIM
21310 18" 3-1/8"
21320 24" 3-1/8"

ALERT
Red-Brown plastic filaments are non-absorbent, and wash easily. May be used for wet or dry sweeping. Outlasts most natural fibres. Staple set in lacquered hardwood block. Two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
21180 16" 3-1/8"
21190 18" 3-1/8"
21200 24" 3-1/8"

HUMMER
Center row of round steel wire easily penetrates grease, dirt, etc. Balance of fill is Tampico fibre. The wire trim is shorter than than the balance of the stock. Extra pressure engages wire with brushing surface. Staple set in lacquered hardwood block having two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
21250 16" 2-7/8"
21260 18" 2-7/8"
21270 24" 2-7/8"

DICK
Stiff Palmyra fibre is highly recommended for wet or dry sweeping on rough concrete or wood floors. Staple set in lacquered hardwood block. Two threaded handle holes.

PART NUMBER LENGTH OF BLOCK TRIM
21110 16" 4"
21120+ 18" 4"
21130 24" 4"
21140 36" 4"
^Top
Handles & Floor Brush Braces
handles

THREADED FLOOR BRUSH HANDLES
Smooth, lacquered hardwood.

STANDARD - WOOD THREADS

PART NUMBER LENGTH DIAMETER
21723 4-1/2' 15/16"
21724 5' 15/16"
21725 6' 15/16"
21894 5' 1-1/8"

 POLY-CAP - PLASTIC THREADS
Plastic coating strengths wood threads.

PART NUMBER LENGTH DIAMETER
21727 5' 15/16"

DIE-CAST THREADS
Die-cast metal tip and thread

PART NUMBER LENGTH DIAMETER
21705 5' 15/16"

TAPERED END HANDLES AND LONG POLES
Smooth finished.

Use with:

  • Push brooms
  • Deck scrubs
  • Window and roof brushes
  • Squeegees
PART NUMBER LENGTH DIAMETER
21729 4-1/2' 1-1/8"
21730 5' 1-1/8"
21731 6' 1-1/8"
brace

FLOOR BRUSH BRACE NO. 21734

This sturdy metal brace fits on the underside of handle between the handle and block. It re-enforces and locks the handle to the block. Brace easily attached with wing nuts. Braces are reusable.

brace

FLOOR BRUSH BRACE NO. 21735

A sturdy steel strap clamps around handle and extends to block where it fastens with screws. Especially good for long floor brushes. These braces are re-useable.

brace

BRACE ATTACHMENT HANDLE-REVERSIBLE

Heavy duty handle equipped with a cast aluminum brace 7" wide. Attaches to floor brush block with two wing nuts.

PART NUMBER LENGTH DIAMETER
21728 5' 1-1/8"
^Top
Squeegees
Note: Handles sold separately
squeegee

Plated steel frame and handle socket. Medium priced, angle front type. Two quality rubbers securely fastened with machine screws.

SQUEEGEE PART NUMBER SIZE EXTRA RUBBER PART NUMBER
21389 6" 21745
21390 7-1/2" 21746
21391 10" 21747
21392 12" 21748
21393 14" 21749
21394 16" 21750
21395 18" 21751
squeegee

Plate 18 gauge steel frame and handle socket. Red gum rubber blade 3/16" thick x 2" wide. Rubber fastens to threaded frame with screws. No nuts required.

SQUEEGEE PART NUMBER SIZE EXTRA RUBBER PART NUMBER
21404 18" 21778
21407 24" 21779
squeegee

HEAVY DUTY
Cadmium plated steel frame and handle socket. Neoprene blade 1/4" thick x 2" wide. Rubber fastens to threaded frame with screws. No nuts required.

SQUEEGEE PART NUMBER SIZE EXTRA RUBBER PART NUMBER
21406 18" 21780
21407 24" 21781
21408 30" 21782
21409 36" 21783
squeegee

CURVED END (HEAVY DUTY)
Cadmium plated steel frame and handle socket. Black Neoprene rubber 1/4" thick x 2-1/2" wide is oil resistant. Rubber fastens to threaded frame with screws. No nuts required. 36" comes with handle brace.

SQUEEGEE PART NUMBER SIZE EXTRA RUBBER PART NUMBER
21410 24" 21784
21411 31" 21785
21412 37" 21786
^Top
 

Home  |  Compressors  |  Compressor Accessories  |  Air Tools  |  Air Tool Accessories

Fittings & Valves  |  Abrasives  |  Cutting Tools  |  Contacts  |  Index