Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Cutting Tools
Melin End Mills
Two Flute Carbide 90 Degree Drill Point End Mill - Single End

Carbide End mills

Tolerance +.000 / - .002

Part # Mill
Diameter
Shank
Diameter
Flute
Length
Overall
Length
AMG-404-DP 1/8 1/8 1/2 1-1/2
AMG-606-DP 3/16 3/16 5/8 2
AMG-808-DP 1/4 1/4 3/4 2-1/2
AMG-1010-DP 5/16 5/16 13/16 2-1/2
AMG-1212-DP 3/8 3/8 7/8 2-1/2
AMG-1414-DP 7/16 7/16 1 2-3/4
AMG-1616-DP 1/2 1/2 1 3
AMG-2020-DP 5/8 5/8 1-1/4 3-1/2
AMG-2424-DP 3/4 3/4 1-1/2 4

^Top

Two & Four Flute Chamfer Carbide End Mills - 60 & 90 Degree

Carbide End mills

2 Flute
Part #
4 Flute
Part #
Degree Mill
Diameter
Shank
Diameter
Flute
Length
Overall
Length
CMG2-808-60 CMG4-808-60 60 1/4 1/4 3/16 2-1/2
CMG2-808-90 CMG4-808-90 90 1/4 1/4 3/16 2-1/2
CMG2-1212-60 CMG4-1212-60 60 3/8 3/8 5/16 2-1/2
CMG2-1212-90 CMG4-1212-90 90 3/8 3/8 5/16 2-1/2
CMG2-1616-60 CMG4-1616-60 60  1/2 1/2 7/16 3
CMG2-1616-90 CMG4-1616-90 90  1/2 1/2 7/16 3
  CMG4-2424-60 60 3/4 3/4 5/8 4
  CMG4-2424-90 90 3/4 3/4 5/8 4
 

Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.

Airtek Ltd., 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820