M.A. Ford 6 Flute HSS Countersinks. MA Ford makes the best quailty countersinks on the market

email sales@airtekltd.com phone 514-336-3820 fax 514-745-1764

Cutting Tools

M.A. Ford

	Series 79 HSS Chaterless 6 Flute Countersink
	Series 79 HSS Chaterless 6 Flute Countersink Set
	Back to the Countersink Index
	Quick Find Index
	Back to the M.A. Ford Main Index

Series 79 HSS Chaterless 6 Flute Countersink

These standard six flute countersinks are designed for economical, general purpose countersinking, chamfering or deburring. Because of the multiple flute design, chip loads are generally smaller and even at maximum speeds, chatter-free machining is possible.

Steam homo surface treatment (blackening) to prolong tool life and prevent galling

60°	82°	90°	100°	110°	120°	BODY	LENGTH	SHANK
PART NO.	PART NO.	PART NO.	PART NO.	PART NO.	PART NO.	DIAMETER	OVERALL	DIAMETER
79012501	79012502	79012503	79012504	79012505	79012506	1/8	1-1/2	1/8
79018701	79018702	79018703	79018704	79018705	79018706	3/16	1-1/2	3/16
79025001	79025002	79025003	79025004	79025005	79025006	1/4	2	1/4
79031201	79031202	79031203	79031204	79031205	79031206	5/16	2	1/4
79037501	79037502	79037503	79037504	79037505	79037506	3/8	2	1/4
79050001	79050002	79050003	79050004	79050005	79050006	1/2	2	3/8
79062501	79062502	79062503	79062504	79062505	79062506	5/8	2-1/4	3/8
79075001	79075002	79075003	79075004	79075005	79075006	3/4	2-3/4	1/2
79087501	79087502	79087503	79087504	79087505	79087506	7/8	2-3/4	1/2
79100001	79100002	79100003	79100004	79100005	79100006	1	2-3/4	1/2
79125001	79125002	79125003	79125004	79125005	79125006	1-1/4	3	1/2*
79150001	79150002	79150003	79150004	79150005	79150006	1-1/2	3-1/2	3/4*
79200001	79200002	79200003	79200004	79200005	79200006	2	3-3/4	3/4*
79250001	79250002	79250003				2-1/2	5	3/4*
79300001	79300002	79300003				3	5-1/4	3/4*

* Straight shank with tang drive

^Top

Series 79 HSS Chaterless 6 Flute Countersink Set

This set of seven Series 79 countersinks include 1/4",5/16", 3/8", 1/2", 5/8", 3/4" and 1" diameter tools. Sets are available with 60°, 82°, 90° or 100° included angles. Tools are packaged in plastic cases

SET NUMBER	INCLUDED ANGLE
79000001	60°
79000002	82°
79000003	90°
79000004	100°

^Top