Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Recommended for use on abrasive, non-metallic and non-ferrous materials.

• Easily resharpened
• May be used on hardened steel and work hardening alloys
• Rigid set-ups and good machinery maintenance are a must
• Not recommended for use in hand-held tools.

^Top

This is the original single flute countersink designed for general purpose countersinking, chamfering or deburring.

• Self piloting and completely chatterless
• No secondary burs formed
• Each size may be used on a wide range of hole diameters
• Use on a machine tool or in hand-held tool applications
• Easily resharpened
• Steam homo surface treatment (blackening) to prolong tool life and prevent galling

*Straight shank with tang drive

^Top

This set of four Series 61 Uniflute countersinks include
1/4",1/2", 3/4" and 1" diameter tools.
Sets are available with 60, 82, 90, 100 or 120° included angles.
Tools are packaged in plastic cases

^Top

Designed for general purpose countersinking, chamfering or deburring

• Efficient stock removal, chatter-free finish.
• 3/16" and 1/4" tools are double ended.
• Bright finish helps reduce chip build-up on cutting edge.

^Top