Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Fittings & Valves
Coilhose Pneumatics

Coilhose fittings are designed for use with our nylon 11 self-storing hose and our nylon 11 tubing.
Fitting, ferrule, nut and insert are included with the fittings. Model numbers beginning with "S" are for stowaway

Rigid Male

male

Part # Hose ID Description
CRM0202 1/8" 1/8" MPT
CRM0304 3/16" 1/4" MPT
CRM0404 1/4" 1/4" MPT
CRM0504 5/16" 1/4" MPT
CRM0604 3/8" 1/4" MPT
CRM0606 3/8" 3/8" MPT
CRM0808 1/2" 1/2" MPT
CRM1212 3/4" 3/4" MPT
SRM0404 1/4" 1/4" MPT
SRM0604 3/8" 1/4" MPT
SRM0606 3/8" 3/8" MPT

Rigid Female

female

Part # Hose ID Description
CRF0304 3/16" 1/4" FPT
CRF0404 1/4" 1/4" FPT
CRF0504 5/16" 1/4" FPT
CRF0606 3/8" 3/8" FPT
CRF0808 1/2" 1/2" FPT
SRF0404 1/4" 1/4" FPT

Swivel Male

male

Part # Hose ID Description
CSM0202 1/8" 1/8" MPT
CSM0304 3/16" 1/4" MPT
CSM0404 1/4" 1/4" MPT
CSM0504 5/16" 1/4" MPT
CSM0604 3/8" 1/4" MPT
CSM0606 3/8" 3/8" MPT
CSM0808 1/2" 1/2" MPT
CSM1212 3/4" 3/4" MPT
SSM0404 1/4" 1/4" MPT
SSM0606 3/8" 3/8" MPT

Swivel Male (BSP)

male

Part # Hose ID Description
CSM0202M 1/8" 1/8" BSP
CSM0304M 3/16" 1/4" BSP
CSM0404M 1/4" 1/4" BSP
CSM0504M 5/16" 1/4" BSP
CSM0606M 3/8" 3/8" BSP

Elbow

elbow

Part # Hose ID Description
CEM0202 1/8" 1/8" MPT
CEM0304 3/16" 1/4" MPT
CEM0404 1/4" 1/4" MPT
CEM0504 5/16" 1/4" MPT
CEM0604 3/8" 1/4" MPT
CEM0606 3/8" 3/8" MPT
CEM0808 1/2" 1/2" MPT
SEM0404 1/4" 1/4" MPT
SEM0606 3/8" 3/8" MPT

Union

union

Part # Hose ID
CU03 3/16"
CU04 1/4"
CU05 5/16"
CU06 3/8"
CU08 1/2"
SU04 1/4"
SU06 3/8"

Nut

nut

Part # Hose ID
CN02 1/8"
CN03 3/16"
CN04 1/4"
CN05 5/16"
CN06 3/8"
CN08 1/2"
CN12 3/4"

Ferrule

sleeve

Part # Hose ID
CPF02 1/8"
CPF03 3/16"
CPF04 1/4"
CPF05 5/16"
CPF06 3/8"
CPF08 1/2"
CPF12 3/4"

Tube Inserts

insert

Part # Hose ID
CTI02 1/8"
CTI03 3/16"
CTI04 1/4"
CTI05 5/16"
CTI06 3/8"
CTI08 1/2"
CTI12 3/4"
STI04 1/4"
STI06 3/8"

Spring Guards

spring

Part # Hose ID
CSG02 1/8"
CSG03 3/16"
CSG04 1/4"
CSG05 5/16"
CSG06 3/8"
CSG08 1/2"

Assembly Instructions:

repair kit
  1. Cut tube end clean and straight
  2. Slide spring guard over tubing (small end first).
  3. Place ferrule inside nut (large diameter first) and slip nut over tubing so that threaded portion faces end of tubing
  4. Push fitting into tube end (tube will go over insert) until tube bottom's inside fitting body.
  5. Hand tighten nut onto fitting - adding another 1-1/2 to 2 turns with a wrench to assure a secure assembly.
  6. Thread the spring guard over nut to complete assembly.

NOTE: Ferrules and inserts are not reusable and should be replaced with each assembly.

^Top

Coilhose Repair Kits
Part # Hose ID Description
RK082 1/8" 1/8" Rigid (M)
RK083 1/8" 1/8" Swivel (M)
RK085 3/16" 1/4" Rigid (M)
RK086 3/16" 1/4" Swivel (M)
RK090 1/4" 1/4" Rigid (M)
RK092 1/4" 1/4" Swivel (M)
RK096 5/16" 1/4" Rigid (M)
RK098 5/16" 1/4" Swivel (M)
RK100 3/8" 1/8" Rigid (M)
RK110 3/8" 3/8" Rigid (M)
RK112 3/8" 3/8" Swivel (M)
RK114 3/8" 1/4" Swivel (M)
RK118 1/2" 1/4" Rigid (M)
RK119 1/2" 1/4" Swivel (M)

Fitting, ferrule, nut, insert and spring guard are included with the repair kits.

^Top

nylon tube

Coilhose Pneumatics®Nylon 11 tubing is highly flexible, lightweight and dimensionally stable (will not "swell" under pressure).
Its ability to withstand abrasion and corrosion as well as its resistance to most chemical, gasoline, oil and grease make it popular choice for air, chemical and lubricant lines.
Nylon 11 also absorbs very little moisture.
Standard color is yellow (1/4" ID tubing also available in red).

Part # Tube ID Tube OD Wall Thickness
NT043 3/16" .247"/.253" .031" +/- .003"
NT054 1/4" .305"/.313" .033" +/- .003"
NT065 5/16" .369"/.377" .037" +/- .003"
NT086 3/8" .465"/.475" .045" +/- .003"
NT108 1/2" .620"/.630 .062" +/- .004"