Combining a compact configuration with a rigged die cast aluminum body, the 26 Series offers an ideal solution to most design problems.  Available with many popular options, these units provide the advantages of a specially  engineered system at substantial cost savings.  The 26 Series features a 3/8" body with either 1/4" or 3/8" NPT ports.

• Excellent water removal efficiency
• Available with either 40 micron or 5 micron filter element
• Bowl guard is supplied as standard and mounts directly to the filter body, independent of the bowl
• Bowl volume: 3.8 oz

Options are indicated by adding a dash followed by the corresponding suffix(es) in alphabetical order to the part number

• Removes 99.97% of oil and water aerosols as well as solids larger than .3 microns
• Bowl guard is supplied as standard and mounts directly to the filter body, independent of the bowl
• Bowl volume: 3.8 oz

Options are indicated by adding a dash followed by the corresponding suffix(es) in alphabetical order to the part number.

COALESCING FILTER FLOW RATINGS IN SCFM AT 1.5 PSID PRESSURE DROP

• Two full flow 1/8" gauge ports can be used as secondary outlet ports.
• Balanced poppet valve design assures superior performance
• Convoluted diaphragm type regulator has low initial pressure droop while maintaining high sensitivity.
• Nonrising regulation adjustment knob locks in place and maintains desired pressure setting.
• Order gauges separately

Options are indicated by adding a dash followed by the corresponding suffix(es) in alphabetical order to the part number.

• Lubricant can be added through fill port without shutting-bowl removal and depressurization is not necessary.
• Tamperproof adjusting cap allows required oil delivery rate to be locked in place.
• Once delivery rate is set, lubricant is proportionately delivered at all other air flows no readjustment is required.
• Bowl guard is supplied as standard and mounts directly to lubricator body, independant of the bowl.
• Bowl volume: 3.8 oz.

Options are indicated by adding a dash followed by the corresponding suffix(es) in alphabetical order to the part number.

• Spacing saving design offers both filter and regulator features in one unit that requires only two pipe connectors, reducing the possibility of leakage.
• Order gauge separately

Options are indicated by adding a dash followed by the corresponding suffix(es) in alphabetical order to the part number

Integral Filter/Regulator - Lubricator
Duo Assembly
(includes 0-160 psi pressure gauge)

Filter - Regulator - Lubricator
Trio Assembly
(includes 0-160 psi pressure gauge)