Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Part # 8653

Part # 8654

Coilhose Pneumatics© 8653 Electronic Automatic Drain Valve allows accumulated water to be released from dryers, separators, after coolers, drop legs, filter, high elevation locations and other remote or hard to reach installations. The adjustable electronic timer allows precise settings for both cycle time between discharges as well as actual drain time (amount of time valve is open ). By adjusting the cycle time to meet specific requirements of peak moisture accumulation, pneumatic air lines are protected against flooding without the time, expensive and inconvenience of manually draining the equipment.

• Cycle time (time between valve openings) can be set from 1 to 45 minutes-setting is easily changed to fit the demand of any system.
• Drain time (amount of time valve is open) can be adjusted from1 to 15 seconds-keeps air loss during fluid discharge to a minimum.
• Bronze filter built right into the body protects the drain valve from foreign particles in the line, allowing optimum performance and trouble free operation.
• Operates on 120V 60Hz/110V 50hz voltage (supplied with 6 foot heavy duty grounded power cord.)
• Manual override permits valve to be opened between set cycles.
• Drain valve can be operated in any position.
• Constructed from all stainless steel and brass components along with NEMA 4 (watertight, dust tight) enclosed timer assuring long lasting operation in any industrial environment.
• One (1) 1/4" in port and two 1/4" out ports allow increased system design flexibility-brass port plug is supplied for unused out port.
• Valve and power cord set (without timer) available for completely manual operation.
• Solid state timer, heavy duty power cord and solenoid and solenoid valve available as individual components

^Top