Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

The 27 Modular Series of filters, regulators and lubricators is constructed of lightweight aluminum in a compact design, combining ease of installation with superior design flexibility. Each unit is adaptable for conversion to duo or trio systems either with clamps which connect without disturbing existing piping or with standard nipples. A portion of the filtered and /or regulated air can be directed to a branch line or device through the use of a modular distribution block. The 27 Series features a 1/2" body with either 3/8" or 1/2", or 3/4" NPT ports.

• Available with either 40 micron or 5 micron filter element.
• Bowl guard is supplies as standard and mounts directly to the filter body, independent of the bowl.
• Bowl volume: 8.5 oz.

^Top

Coalescing Filter Flow Ratings in SCFM at 1.5 PSID Pressure Drop

• Removes 99.97% of oil and water aerosols as well as solids larger than .3 microns.
• Bowl guard is supplied as standard and mounts directly to the filter body, independent of the bowl
• Bowl Volume: 8..5 oz

Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.

^Top

• Two full flow 1/4" gauge ports can be used as secondary outlet port.
• Balanced poppet valve design assures superior performance.
• Diaphragm type regulator has low initial pressure drop while maintaining high sensitivity.
• Non rising regulation adjustment knob locks in place and maintains desired pressure setting.
• Order gauge separately.

Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.

^Top

• Lubricant can be added through fill port without shutting down air line-bowl removal and depressurization is not necessary.
• Tamperproof adjusting cap allows required oil delivery rate to be locked in place.
• Once delivery rate is set, lubricant is proportionately delivered at all other air flows no readjustment is required.
• Quick Fill Plug available for use with standard "quick fill" equipment on high lubrication usage applications.
• Bowl guard is supplied as standard and mounts directly to lubricator body, independent of the bowl.
• Bowl volume: 8.5oz.

Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.

^Top

• Space saving design offers both filter and regulator features in one unit that requires only two pipe connections, reducing the possibility of leakage.
• Order gauge separately

Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.

^Top

^Top