| Part # | Port Size |
| MF1 | 1/8" |
| MF2 | 1/4" |
The Miniature Series is designed for applications where space is limited such as compact control panels and miniature circuits. These units feature tough die cast zinc body construction with either 1/8" or 1/4" in/out ports. Each unit can be completely disassembled by hand, simplifying maintenance requirements.
- Manual drain allows quick and easy removal of fluids.
- 20 micron or 5 micron filter element available.
- Bowl volume: 1.5 oz
Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.
| Option | Suffix |
| Metal Bowl. | M |
| 5 Micron Element | X |
| Part # | Port Size |
| MC1 | 1/8" |
| MC2 | 1/4" |
- Removes 99.97% of oil and water aerosols as well as solids larger than .3 microns.
- Bowl Volume: 1.5 oz
Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.
| Option | Suffix |
| Metal Bowl | M |
| Part # | Port Size |
| MR1 | 1/8" |
| MR2 | 1/4" |
- Two full flow 1/8" gauge ports can be used as secondary outlet port.
- Low friction "U" cup piston seal assures long and reliable service life.
- Available with 0-125 psi,0-50 psi or 0-20 psi pressure ranges.
- Built in self-relieving feature protect system components from over-pressurization of downstream of downstream air, permitting pressure adjustments in dead end circuits.
- Patented "snap-lock" non-rising adjusting knob locks in place and maintains pressure setting.
- Order gauges separately.
Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.
| Option | Suffix |
| Extra Low Pressure Spring (0-20psi) | J |
| Low Pressure Spring (0-50 psi) | L |
| Panel Mount | P |
| Part # | Port Size |
| ML1 | 1/8" |
| ML2 | 1/4" |
- Tamperproof cap can be used to adjust oil delivery rate and lock desired lubrication level in place.
- Provides constant oil delivery at both steady and pulsing air flows.
- See-through drip tube gives visual indication of lubricant flow rate.
- Bowl volume:1.5 oz
Options are indicated by adding a dash followed by the corresponding suffix (es) in alphabetical order to the part number.
| Option | Suffix |
| Metal Bowl. | M |
| Part # | Pipe Size |
| MFC1 | 1/8" |
| MFC2 | 1/4" |
- Combines the filter and regulator features into a compact single unit.
- Order gauge separately
Options are indicated by adding a dash followed by the corresponding suffix(es) in alphabetical order to the part number.
| Option | Suffix |
| Metal Bowl | M |
| 5 Micron Element | X |
Integral
Filter/Regulator - Lubricator
Duo Assembly
(includes 0-160 psi pressure gauge)
| Part # | Pipe Size |
| MFCL1-G | 1/8" |
| MFCL2-G | 1/4" |
Filter - Regulator - Lubricator
Trio Assembly
(includes 0-160 psi pressure gauge)
| Part # | Pipe Size |
| MFRL1-G | 1/8" |
| MFRL2-G | 1/4" |
| Part # | Description |
| Repair Kits | |
| MF2RK | Filter Bowl Replacement Kit |
| MR140RK | Regulator Repair Kit |
| ML2RK | Lubricator Bowl Replacement Kit |
| Filter Accessories | |
| MF140-41M | Metal Bowl |
| Part # | Description |
| Regulator Accessories | |
| MR140MB | Mounting Bracket and Panel Nut |
| Recommended Pressure Gauge | |
| 26G-60 | 0-60 Psi (1 1/2" dial) |
| 26G-160 | 0-160 Psi (1 1/2" dial) |
| Lubricator Accessories | |
| ML140-41M | Metal Bowl |
Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.
Airtek Ltd., 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820